4875 Imprint Adjustment

All units should be tested using the appropriate plastic account card, merchant plate and form set.

If adjustments are required remove snap on handle by placing fingers of both hands under plastic head cover (Figure 1). Pull outward in both directions parallel to base and then press fingers up.

Merchant plate print is too light.

Turn adjustment screw (tension screws) (A) about 1/8 turn clockwise (Figure 2).

Merchant plate print is too dark.
Turn adjustment screws (A) 1/8 turn counter-clockwise (Figure 2).

Plastic card information is too light.
Turn upper adjustment screws (B) about 1/8 turn clockwise (Figure 2).

Plastic card information is too dark.
Turn upper adjustment screws (B) about 1/8 turn counter-clockwise (Figure 2).

 

4875_IA

Select your country

United States
Canada
International