1. Open imprinter by pushing release button.
2. If needed, install merchant plate by removing paper liner from adhesive pad (see diagram) and placing plate over adhesive.
3. Place card in imprinter as show in Diagram.
4. Insert Form under form clip with top edge against form stops (see diagram). Close imprinter.
5. Slide handle left to right, open imprinter and remove print. Return handle to left side. Suggestion: to slide the handle across the imprinter, place hand over the imprinter and use thumb to move imprinter handle (see fig. A) or slide handle across using four fingers with imprinter braced against palm (see fig. B).